ProCleaner C100
Efficient washing of potato crates and other boxes for crops
With the C100, one person can wash up to 40 boxes per hour and manage the entire process from a forklift. This setup provides significant savings in labor hours, while also greatly improving the work environment, eliminating the need for many strenuous hours with a pressure washer.
The C100 is initially loaded with 8 boxes. Once the first 4 are cleaned, they are removed, and replaced with 4 new dirty boxes. The process continues, allowing for a seamless exchange as the next 4 clean boxes are swapped out with dirty ones.
With the C100, Washpower automates and elevates the efficiency of washing boxes used in agriculture to new heights.
Some key points for the ProCleaner C100
- High capacity and one person is able to clean
up to 40 boxes per hour - Uniform and efficient cleaning
- Super flexible in terms of box size
Cleaning of crates has never been easier
Watch and read more about the C100.
Product video
SCEA Leborgne’s experiences – French customer
How it works
In the illustration shown below you see a wash setup seen from above, with up to 4 crates placed in each direction of the robot.
Three nozzles
Two nozzles washing the outer side of the boxes and one placed in the middle, that is washing the inside of the boxes.
Box dimensions
The size of the box is pretty much unlimited, without limits on both width and depth.
As a standard, the height is up to 130 cm, but it is possible to extend it to 150 cm.
Driving tracks
The robot is as standard delivered with 5×3 meters of tracks, that will guide the robot along the boxes in its washing cycle.
Pump guide
In this table it is shown how the pump capacity affects the numbers of boxes per hour. If the total pump capacity is not sufficient, then the robot needs to run two cycles to wash the boxes, one cycle focusing on washing the boxes on the outside and then another wash cycle to focus on the inside afterwards.
| Pump capacity – Value in liters per minute |
One or two washing cycles for complete wash | Estimated boxes per hour |
Nozzle requirements |
| 1 x 20 liters pump | 2 wash cycles | 20 boxes per hour | Use 20 liter nozzle for inside / middle |
| 2 x 20 liters pump | 2 wash cycles | 25-30 boxes per hour | Standard nozzle |
| 1 x 30 liters pump | 2 wash cycles | 20-25 boxes per hour | Standard nozzle |
| 2 x 30 liters pump | 1 to 2 wash cycles | 30-40 boxes per hour | If only one wash cycle, then use 20L nozzles |
| 1 x 36 liters pump | 2 wash cycles | 25-30 boxes per hour | Standard nozzle |
| 2 x 36 liters pump | 1 wash cycle | 35-40 boxes per hour | Standard nozzle |
| 1 x 40 liters pump | 2 wash cycles | 25-30 boxes per hour | Standard nozzle |
| 2 x 40 liters pump | 1 wash cycle | 40-45 boxes per hour | Standard nozzle |
| Pump capacity – Value written in liters per minut. |
Performance |
| 1 x 20 liter pump |
2 wash cycles 20 boxes per hour Use 20 liter nozzle for inside / middle |
| 2 x 20 liter pump |
2 wash cycles 25-30 boxes per hour Standard nozzle |
| 1 x 30 liter pump |
2 wash cycles 20-25 boxes per hour Standard nozzle |
| 2 x 30 liters pump |
1 to 2 wash cycles 30-40 boxes per hour If only one wash cycle, then use 20L nozzles |
| 1 x 36 liters pump |
2 wash cycles 25-30 boxes per hour Standard nozzle |
| 2 x 36 liters pump |
1 wash cycle 35-40 boxes per hour Standard nozzle |
| 1 x 40 liters pump |
2 wash cycles 25-30 boxes per hour Standard nozzle |
| 2 x 40 liters pump |
1 wash cycle 40-45 boxes per hour Standard nozzle |
Specifications
| Robot dimensions L x W x H | 3950-5020 x 1232 x 1700 mm |
| Weight | 250 kg |
| Power supply | Battery 24 V DC |
| Battery performance | 12 H operation / 12 H charge |
| Water consumption |
Min. 25 / max. 80 l/m Min. 6,6 / Max. 10,6 gallon/m |
| Max. water pressure | 200 bar / 2900 psi |
| High pressure pump | External |
| Max. water temperature | 60 °C |
